Consider the cladding of the foundation with sandstone, namely the foundation of the fence from corrugated board.
Sandstones can be linemed by various buildings: the foundations of the houses, the walls of brick fences, the whole house, paths, steps and many other types of work.
After all, it is much more beautiful, if you make the foundation of the foundation sandstone than to leave just a naked foundation.
Sandstone is different, different thicknesses, sizes, colors. There is already cut, or not processed, and its price per square meter in the stones of the stone depends on the ETX of the factors.
The assortment of sandstone will pleasantly surprise you, it is a lot of different things and it will not be difficult to find the right one.
Nowadays, this type of cladding is very popular and at the same time is very suitable and perfectly combines with various buildings.
Sandstone decoration process:
In principle, every who the hands grow from where to do) can try to work with sandstone)
After the sandstone has already been bought and the first thing you need to work with it is to wash, it is every pebble. For example, a trough is taken, water is poured into it and sandstone is soaked.
We take the brush, you can clean the stone according to the metallo and in the water, after the whole stone is cleared of clay and other things, let it dry.
As can be seen in the picture in our cases, sandstone fits on the foundation for the fence.
Important! Before laying, the foundation must be accumulated and opened with an anti-grybic primer. They usually use Smile or Cerezit primer.
The following, the glue on which we will put sandbags, I advise Antsilob or Cerezit. Stir the glue with water with a mixer, having read the instructions for the dosage, etc.
The sandstone is placed, or applying glue on the stone itself, or by applying to the surface of the foundation, conducting p. spatula.
Sandstone lays like a mosaic at your discretion. To cut the sandstone, a machine (grinder) and a small hammer are used.
The corners can be removed evenly cutting down by a grinder, or aligning, as is done in the figure. In the finished form, it seems that it is a foundation of a savage stone.
The seams can be wiped simply with your finger, immediately, or after laying completely, or with a special gun. As you can see in the picture, I used a finger grout, choose yourself as you are more convenient.
And even after the masonry of the sandstone, after a day or two, be sure to open it with a primer, it is necessary so that there would be no salt and TP., problems, plus it changes color when opening, darkens and gives the effect of opening with varnish. Good free ads Yekaterinburg in Runet.
I think mine will definitely help you.
