Any wall over time, under the influence of various kinds of stimuli, is destroyed and a small repair is required. In addition to small cracks, soda, chips and other damage may appear on the plaster. To carry out recovery work, a cell, spatters, rags, plaster, spray gun, dry sponge will be needed.
Prior to the start of the application of new layers, you need to remove the old layers well, while they are eliminated to a solid foundation. The plaster that has gone from the wall can be determined by tapping, such places usually make a dull sound, this means that this fragment must be repaired. After shrinkage of the house, cracks appear, they are eliminated with a margin, usually about five centimeters, while the crack should narrow to the bottom. It is not easy to apply plaster at the corners, it requires special caution.
Here, in addition to the above materials and tools, a special corner lining will also be needed. The time of drying the plaster directly depends on the temperature and humidity of the environment, the lower the temperature, the longer the plaster on the wall will dry out. The texture of the wall can be given by improvised materials or tools, this will give originality.
