All waterproofing work is an integral part of all construction work, due to which the service life and life of buildings are significantly increased. So, there are several types of waterproofing in the world. Let’s look at them all together. The very first type of waterproofing is coating or as many builders and spray specialists call it. It is applied in two layers on the required surface, such as moisture -resistant plywood and t. d, while the layer thickness is adjustable from two tenths to four millimeters. Do not forget before applying the second layer the first should be dried one hundred percent.
But paint waterproofing is not plastic enough, so it is practically not used on surfaces that may be deformed as a result of various actions. Further, glow waterproofing. Everyone saw this species because it is produced in the form of rolls and sheets. They are most often used in the roof. More information about this type of waterproofing can be clarified by a consultant in your store.
And after that we smoothly move on to the third type of waterproofing – plastering. This type consists in applying special waterproof cements to the surface. All this is applied in a mechanized way, by the method and depending on the wishes and necessity, the number of necessary layers is selected.
For example, asphalt plastering insulation is made using fine -grained asphalt concrete. Cast asphalt isolation was obtained by pouring cold or hot asphalt mass. Universal insulation is impregnated insulation, as it is suitable for all types of work. But the injection is used less and less.
