Corresponding oil, such as hemp, tung (danish oil) or teak, apply a brush or swab with a brush. Oil is usually well suited for external work, since it repels water, and also gives the splendor to some wooden breeds. Since the oil is deeply absorbed between the fibers, this will help to dilute the first layer up to 20% (using white spirit).
1 stains are usually on oil or water -based: the former is easier to apply, and the latter are absorbed deeper. Alternative options, such as flowering artistic oil paints with subsequent processing of PAC on a turpentine basis, can be effectively used.
Prepare the surface with a water glitter apply a swab or brush. Subsequent wiping with wet fabric will improve the finish.
2 To fill in the open pores of this ash, a dark stain is used, then the surface is quickly wiped, the current to appear texture and pattern. This gives wood the effect of “aging” that many people like. It’s good to try first on the waste of wood of the same type.
3 After that, the entire surface is saturated with varnish, easily process it in parallel to the edges, holding a brush at a small angle to remove the stumps and influxes.
4 Tilt the product (you will have to cover the lower part after the first side dries) and quickly and quickly move the brush along the fibers, checking the presence of fluxes to reflect light on the surface.
Lacquer grass (stains) can be applied with a brush in the same way as transparent stains. First you can put one layers of transparent varnish, or you can apply varnish grass and directly to the wood
When it is applied to the covered or unheated wood, the latest movements of the brush should be directed along the fibers. It may require two layers.
Epoxy resin, which freezes when heated with a chemical catalyst, is extremely durable, durable and chemically, it is supplied in two from tar containers, the contents of which are mixed immediately before use, t. e. belongs to the “component” adhesives of the epoxy resin withstands a very high temperature and is over-almost impenetrable coating.
After mixing the epoxy resin itself with a hardener in the corresponding container, apply it with a brush to the surface. Be careful, avoid driving on vertical edges, epoxy resin should dry and. At least grind before applying the next layer. To get an impeccable finish, it is necessary to apply several layers that are processed by the skin before applying the next.
