The more frequent desire to repair the apartment (or premises of a private house) is its redevelopment, that is, the redevelopment of the apartment or premises of a private house. Such repair work provides for the construction of new walls and the destruction of existing ones (resolution of non -carrying walls, however, it is forbidden to break the walls of the walls!). It is quite possible to carry out the plan, using drywall partitions for this. It is worth noting that drywall partitions are included in the cost of major repairs in the apartment.
The formation of walls from gypsum plasters is carried out in two stages: the first stage of work is the installation of a profile frame, and the second stage of work is the subsequent shelling of drywall with its sheets. The assembly of the frame is made from a specially designed profile for this, which can have a different thickness. By choosing a profile with a large thickness, you can provide a much greater sound insulation by placing a thicker layer of soundproofing material between the sheets of drywall.
Installation of the frame is best to start by marking the place where it will be installed. To do this, its location is noted on the floor, then the profile itself is installed and fastened with dowels. The same profile is installed on the wall conjugated with the partition. After that, using the already fixed parts of the frame and to accurately observe geometry, the building level can be attached to the ceiling part of the profile. After installing and strengthening the profile with stiffeners, you can proceed to its lining with drywall sheets, laying the wiring and all the necessary communications.
