Many now prefer parquet floor. And all because the parquet looks good and it is not at all difficult to put it on your own.
Many people think that the parquet board does not need to be taken care of, but this is not so. Over time, various signals appear that the parquet needs to be repaired. This is the crack of boards, creak, light damage to the stability of ceramic tiles. If this happens, the parquet needs varnish or even its replacement. However, it is more economical to make a parquet repair with your own hands.
The creaky floor is not a particular problem, but irritation causes. The main thing is to determine exactly where the breakdown happened, and which of the boards should be repaired. There are places where the parquet begins to rise near the beam. You can put woods made of wood or attach tiles there. If there are no gaps near the beam, but the creak takes you, then there may have been a gap between the floorboards and the floor itself. It is necessary to use screws with the help of screws. A screwdriver is suitable for such a thing.
If any of the planes of the parquet breaks, then it needs to be replaced. Remove the bad part, measure the size of the recess and select a new parquet board. If the gaps remain the same, then they need to be closed with a putty. Do the work carefully so as not to spoil the neighboring fragments of the parquet.
If you still decide to replace the parquet completely, then you should do the work so. 1) first you need to remove the skirting boards that press the parquet near the wall. Do it carefully so as not to spoil the wall covering. But if you have a ransch wallpaper, then you can not worry. 2) Find fragments of parquet, which are a little staggering and begin to extract them. After that, get the neighboring. Better to start from the wall. 3) after removing all the details, align the floor and you can put a new parquet.
We wish you good luck in the repair!
