Directors UD-profiles are attached to the floor, adjacent walls and ceiling. In this regard, it will be worth using the construction level that can be bought at any store of construction tools today will depend on the quality of installation of these profiles. First of all, install wall profiles, and after that, along a line knocked out by the lace or stretched thread, set the floor and tension profile. You will be able to set the plane of the soundproof partition precisely due to these profiles. You can make noise insulation of walls with the help of various materials, both outside and from the inside.
Now provide this plane with stiffeners. Profiles attached to the wall tightly and vertically take over the function of stiffeners’ ribs. They need to be installed with a step of 6 cm and use the P-shaped brackets to attach to the wall. To do this, you can use spacer or clogging dowels, and in order to attach the profile to brackets it is best to use small screws with a length of 7 mm and a diameter of 3 mm.
And horizontal jumper is possible to set these racks in parallel. To dock the drywall sheets, these jumpers are no longer needs if the height of the room exceeds 2.5 meters.
How to lay a heater?
Cut in half the insulation folded in half. It is necessary to get two rolls with a width of 50 cm. After that, they need to be unwound and cut into pieces, even height of the room. Make all the necessary blanks and put them in a finished frame. With the help of brackets, squeeze the protruding tails of the insulation. This is not difficult, but practical skills are useful here. Work so that the mineral insulation does not touch the skin, as it will itch. To do this, take special gloves or mittens.
Sew the walls with drywall
When the insulation is laid in the profile, it must be sewn with drywall sheets. Attach sheets to the supporting profiles using screws. The step between them should not exceed 200 mm. If necessary, sheets can be cut into pieces of the desired size. First make an incision on one side, after that on the other and break the drywall sheet.
