The installation of a house ventilation system is a difficult task and depending on many conditions. When drawing up a ventilation project in the room, it is necessary to comply with fire safety rules, as well as the requirements of sanitary standards and rules of the Russian Federation. Most often, in houses, during construction, exhaust ventilation developed in the project with a natural flow of air and houses in Pereslavl-Zalessky is not an exception. In calculations, special tables of temperature indicators and air exchange are used in different rooms of all kinds of residential buildings. The process of compensation for outgoing air occurs mainly due to outdoor receipt through open windows and windows, as well as from other rooms.
In living rooms, ventilation is possible due to special channels from the toilet, kitchen and bathroom. In the event that the apartment has many rooms, and at the same time is not subjected to through ventilation, ventilation from residential premises should be carried out.
Natural ventilation in the apartment
A fairly convenient and simple way to carry out ventilation in the apartment. The whole process is to create a convection pressure difference in the air duct and on the street. This can resemble a traction similar to a smoke pipe. The output air will be much warmer and rush up, pulling all the unpleasant odors from the toilet, bathroom and kitchen.
The most elementary thing is to be done is to install the supply valve. It allows you to adjust the amount of air coming from the street.
The “minus” of such a system is the inability to open the valve in winter, because it will immediately become cold, at the same time, air flow through such a device is small.
Product ventilation of the apartment
This system consists of a special supply air valve, which has an automatic drive. And also there are filter inserts, fan, noise lord.
After the installation of such a ventilation system, the issue of receipt of fresh air into the room will forever resolve. If the apartment has three rooms, then the receipt of three hundred cubic meters of air in one hour will be quite enough. And in accordance with the sanitary standards of the Russian Federation, about 60 cubic meters should be served for each person. m. per hour.
In addition, automatic systems can be either simple (turning on with conventional toothplars) or improved (automatic control depending on the regime). And microprocessor controllers allow to create modes for specific needs.
