Before starting the construction process itself, you need to deal with the type of crops that a person is going to grow, the size of the country territory itself and, most importantly, the volume of financial capabilities for this work. The room should be on a flat area on which the shadow does not fall from buildings and foliage of trees. If such a zone is not, and the size of the territory does not allow to walk very much, then you can resort to the construction of a single -sloping room, which is most often installed in the southern partition of any buildings. If such a solution is not suitable, you can build a room not far from small bushes.
For the construction of the structure, you need four blanks in the form of a trapezoid. Work begins with cutting a beam. It takes 16 units of material in size 1.2 m, as well as 8 units 1 m. After that, a design is created in the form of landing racks. At 45 degrees, you need to cut the edges of the joints, and then fasten two bars into the screws. A bar of 1 m in size will help to combine a couple of racks among themselves. As a result, you get a design in the form of a trapezoid. It needs to be connected with the base. Such structures need to be made as many as four and mounted at a distance of not more than 1.5 m. Thanks to the wooden beam, the frame is compiled between. Two beams are nailed from the internal section of the building, and in the same way at the top, but in this situation they need to be installed in the transverse direction. Door openings are created in the area of the end. It is worth adding that a summer greenhouse price, which is small, is available to everyone. You can order its construction in any city in the country.
The vertical design of racks in size 1.5 m is attached to the base of the upcoming building at a distance of 1-1.5 m. At the top throughout the territory nailed a beam. On an element of 1.2 m in size, cuts are created, after which it is screwed to the strapping at an angle of 45 degrees and connected to the basis. As a result, the shape of an isosceles triangle comes out. The rafters are installed at a distance of 1-1.5 m. After that, the installation of the ridge timber is carried out. For independent construction, it is better to use the help of a partner.
