Selection of siding is a responsible process, since it is visually difficult to determine the technological differences in a particular manufacturer. Therefore, before buying siding in Yekaterinburg, you need to closely consider all sides of the panel.
You must see that both surfaces of the panel have a flat color. The color of the outer surface can be slightly darker than the internal. Ideally, when both surfaces of the same color that indicates the high quality of siding.
The thickness of the side cut of siding should be the same. This characteristic affects the perception of power loads with siding. If you find the difference in thickness, then do not buy such material, since it is poor -quality.
Gvostic holes serving for fastening siding with nails or self -tapping screws should have the same sizes, even and smooth edges. Any drawback in the holes is a defect, so you can’t buy such siding.
The front surface of the siding is characterized by embossing “under the tree”. It must be checked regarding delaiming, cracks or peeling. This surface should not be glossy, but only matte, because glossy siding is not resistant to sunlight and as a result will “go waves”.
For the thickness of the panel there are certain standards. The thickness of the panel is 1-1.2 mm is normal. After all, siding does not mean a thicker one. Excessively thick panel is not elastic, therefore, temperature differences will affect its condition. The elasticity of the material will contribute to the resistance of mechanical influences. In addition, excess thickness is reflected in the price of the material.
Thus, given the above characteristics, you can independently buy or order good quality siding.
