The variety of construction technologies leaves no doubt that the possibilities of the modern construction and repair process, much wider than the past. There is a lot of various production repair material capable of turning any design solution into the market of construction materials. But for the effective use of construction production, not only experience is necessary, but also an understanding of the purpose of building materials. In a different way, it is necessary to have an understanding of the interaction of materials in the design of any structure. The use of materials as a groove slabs, the installation of which is carried out exclusively suitable materials for this, is not a notorious solution. If you pay attention to the device of the partitions of the house, then many materials are able to produce high -quality walls while saving the space. Largely due to the functionality and non -volume of the plate make it possible to quickly and without special costly work to install interior partitions. The exception is the supporting structures of the structure that should not have any deviations from the functional purpose.
If you look at the construction of modernity, it becomes obvious, the advantage of technologies accelerating the process of construction production, especially with regard to the redevelopment or rebuilding of the premises with the ability to vary the need for its design. Still, if we talk about panel construction, it accelerates the process, construction and, accordingly, reduces the cost of the cost of housing. Although, if you say, frankly panel houses are not preferable to frame monolithic, but even with it partitions from panel gypsum materials. The planning of the supporting structures is based on the desired planning of the structure, taking into account the possible change of it precisely thanks to the partitions, which, if necessary, can stand up without additional difficulty, where the developer wants. For this and not only the reason for the groove slabs, one of the many technologies, which is very convenient and practical when installing partitions. Although there are technological reservations, they are not so significant. Another thing is the process of installing partitions its beginning and end, time suitable for the providence of this kind of construction work. Many points related to the construction and device of partitions requires attention.
For the effective use of building materials, especially slabs for partitions, it would be correct to choose the material, according to the recommendations of the manufacturer in particular, use mortar mixtures that are optimally combined in terms of properties. Also, installation and construction work on the use of plates is carried out to the main decoration, but after all the rough ones are made, including the use of materials that can make a weoming effect. For example, the use of building mixtures that do not correspond to indicators of physicochemical interaction will not lead to positive results. This can be traced on an example – if the tile using tile glue was glued on the soot base. Or if, after the partitions are built, the screed is poured without protecting the lower part of the wall of the partition. In the case of use and operation, grooves can have positive operational characteristics with proper installation in grooves in the right direction and, accordingly, using the mixture, the corresponding technologies.
