The switch has become an compulsory attribute of modern dwelling. For various reasons, situations arise that lead to a breakdown breakdown. The reasons for this can be both objective and subjective. Therefore, there is a need to change it. But do not be scared, replacing the switch is not a complicated process.
First you need to find a phase wire. This can be determined using a deferral probe. After that, a note of this wire is made and the room is de -energized.
Without applying overhead physical efforts, it is necessary to remove the frame of the switch. Depending on the model, the removal process is different. After that, the old switch is dismantled.
When installing new switches, think about the pool canopies also. This will be an excellent solution and addition to new switches.
To install a new switch, it is necessary to decide which connector the corresponding wires are connected. A single -circuit circuit breaker has two terminals, one of which is connected to the phase. The two -key switch has one terminal on one side and two on the other. The phase must be connected where one terminal is located.
After that, the switch is mounted in a socket and clamped by means of mounting legs. Then the circuit breaker lid is installed and power is supplied.
The switch is ready for operation.
